Use Keap to organize all your client information and daily work while streamlining administrative tasks, freeing you up to concentrate on your clients.



keap_logo

Keap

## Activating the sync for the first time

If you set up a new connection and start syncing for the first time then it can take a while before all the contacts are synced in between the two apps. The syncing time depends on which apps you are using and how many contacts you are syncing.

## Syncing new contacts and updates

Once your connection is active, our system checks for changes in the sync every 4-5 minutes. However if the change happens directly after our last check, it can take more than 4 minutes for us to check for changes.

<TipBox>If you would like to force a direct sync then you can always select  
'sync again now' in the top right corner of the dashboard.</TipBox>

![](//images.ctfassets.net/f2ysq090txql/rBEjUD1jl8hZ0T74nbQhi/18f12a01912021f0fe8d1fb330705763/screenshot-2019-01-29-at-15-28-33.png)

<InfoBox>Do bear in mind that it sometimes can take a bit longer for new contacts or updates to appear because of:  
\- a **huge new number of contacts** syncing within the same connection  
\- a **concurrent sync** is running for the same account  
\- the **rate limits** of one of the apps is being reached. More info [here](/help/faq/different-dashboard-states/).</InfoBox>

Activating the sync for the first time  If you set up a new connection and start syncing for the first time then it can take a while before all the contacts are synced in between the two apps  The syncing time depends on which apps you are using and …

Get personalized help for all kinds of errors as well as unexpected behavior in your syncs

How long does it take to sync contacts or updates?

infusionsoft_by_keap_logo

Infusionsoft by Keap

Infusionsoft by Keap offers your small business a range of automated sales and marketing solutions. Having tools like lead generation, marketing automation, and CRM functionality all in one place, allows your business to grow and succeed!


<InfoBox>[**GETTING STARTED GUIDE**](/help/features/getting-started/)**: How to set up a new connection?** </InfoBox>

<InfoBox>[**ALL FEATURES EXPLAINED**](/help/features): **All our features/functionality explained in detail - no app-specifics.** </InfoBox>

**Infusionsoft** **(by Keap)** offers your small business automated sales and marketing solutions. Having tools like lead generation, marketing automation, and CRM functionality all in one place, allows your business to grow and succeed!

<TipBox>We also support [Keap](/help/connector-apps/keap/), the more simplified version of Infusionsoft by Keap.</TipBox>

The video below gives an example of setting up connections with the Infusionsoft app for both Google Contacts as the Xero app.

<Embed src="//www.youtube.com/embed/8_YjORH5DT8" />

**Below you'll find detailed information, specifically for Infusionsoft integrations:**  

## Supported Infusionsoft Integrations

<Widget src="https://cdn.piesync.com/widget.js" left="infusionsoft" />

## Authorizing Infusionsoft

To authorize Infusionsoft, we simply need you to log in and allow access. 

![](//images.ctfassets.net/f2ysq090txql/3s3CRjrF0tH681mITuJ6ig/f07b4481d9f557d57daaf3472e408d7b/screenshot-2019-02-01-at-13-46-25.png)

![](//images.ctfassets.net/f2ysq090txql/25h1r9j6SAONkO34Ifxb5i/403989ae10eaf79c13333b0e323dde52/image.png)

If you already authorized Infusionsoft account(s) in the past or in any other PieSync integration, you can skip this step and choose from your **CONNECTED ACCOUNTS**.

![](//images.ctfassets.net/f2ysq090txql/3gqarcd6GplykRzJLyEB3q/e9755d0c32dc1eba59712355a3975a41/screenshot-2019-02-01-at-13-48-04.png)

## Choose your contact type

Distinguish between Companies and Contacts before proceeding to the configuration page.

![](//images.ctfassets.net/f2ysq090txql/3G7sPVg4s9Gg2Pu9GqUd19/81d71f8fadb3e0881d27182ecd37741f/screenshot-2019-09-18-at-14-56-01.png)

* Learn about our **contact sync below**.
* More in-depth info about our Company to Company sync can be found [here](/help/faq/can-i-sync-company-account-information/).

## \[IF\] Supported Conditions/Filters

*   TAGS 
*   CONTACT OWNER
*   LEAD SOURCE
*   ASSIGNED/UNASSIGNED
*   FIELD VALUES (INCLUDING CUSTOM FIELDS) \[_contains/does not contain/has any value/equals/does not equal/...\]_
*   ALREADY EXISTING IN APP YOU SYNC WITH

![](//images.ctfassets.net/f2ysq090txql/6zX4txn5Fvrm4EZKOBMaC9/c145c5a0e9dea0eca7abf34ed557e178/screenshot-2019-02-01-at-13-49-38.png)

## \[THEN\] Supported Actions

*   ADD/REMOVE TAGS
*   UPDATING FIELD VALUES (INCLUDING CUSTOM FIELDS)

![](//images.ctfassets.net/f2ysq090txql/4WePA193TjorTIkw8S3mov/064e54155b22f20d50b6d1797328bc5e/screenshot-2019-02-01-at-13-49-57.png)

## Default Field Mapping

Depending on the other app you're syncing with, you'll see a number of standard Infusionsoft fields being mapped by default. For instance, in a connection with Google Contacts, the default field mapping looks like this:  

![](//images.ctfassets.net/f2ysq090txql/2DCn456K9Rshdk6Lvn7jCk/199b32f2aa51b2d3f4b8cee75d597314/screenshot-2019-02-01-at-13-56-37.png)

<InfoBox>_PieSync syncs the default name field(s) that come with the apps. Sometimes they have a different structure in both apps you connect. E.g. first and last names are separate in app A and joint in one field in app B._ _In the background, PieSync joins first and last names together from app A to B and separates them again from app B to A. Our algorithm is smart about which part it updates in app B._ </InfoBox>

## Customizable Field Mapping

You can and should map any additional standard & custom fields that aren't included in the default mapping yet. Bear in mind a mapping between two fields can only exist if the types of fields are compatible and the particular compatibility will determine the direction of the mapping as well. More information on Customizable Field Mapping [**HERE**](/help/features/new-customizable-field-mapping/). 

![](//images.ctfassets.net/f2ysq090txql/1CCkH71qhLL7muX8SHiEs6/08e475bf3a7179dd3f2d165ccacccf28/screenshot-2019-02-01-at-13-57-52.png)

## Additional Options 

### Syncing Deletions

In connections between Google Contacts and Infusionsoft, you are able to [**SYNC DELETIONS**](/help/features/syncing-deletions/) **one-way**. When a contact gets deleted in Google Contacts, we add the tag 'PieSync Trash'  to that same contact in Infusionsoft. You will be able to review this segment first before deleting or taking any other action in Infusionsoft too.  

![](//images.ctfassets.net/f2ysq090txql/1GD5QySciPqyt6l8WrKifr/02d2d8c8b04166c62df07ca668594971/screen-shot-2018-04-24-at-16.27.12.png)

### Syncing Unsubscribes

In connections with Marketing Tools (e.g. such as MailChimp), you are able to [sync unsubscribes](/help/features/syncing-unsubscribes/) one-way. When a contact unsubscribes in e.g. MailChimp, we add the tag 'PieSync Unsubscribes' in Woodpecker. You will be able to review this segment first before e.g. deleting or taking action in Woodpecker.

![](//images.ctfassets.net/f2ysq090txql/2DmPRN4cBegoT0QtkAtKVh/c66947e87fe5d437faba29a1b604eec9/screen-shot-2018-04-24-at-16.25.05.png)

### Set Infusionsoft email addresses to Unconfirmed

Each email address stored in Infusionsoft is assigned a status. More in-depth information can be found [here](https://help.infusionsoft.com/userguides/contact-management/create-and-manage-contacts/email-status-icons-explained). The **unconfirmed** email status indicates that you have permission to send marketing messages to the email address.

<InfoBox>Enabling this feature will result in contacts being set to Unconfirmed, meaning they will receive marketing messages.</InfoBox>

![](//images.ctfassets.net/f2ysq090txql/758sml3RoRC8zP8DOE32KK/40b5d67342daa039ad9cb2779f6f2ffd/screen-shot-2018-04-24-at-15.56.32.png)

<InfoBox>The availability of additional options in our sync is app and connection dependent. If the box (screenshot above) is not there to tick, it's simply not possible. We need to be able to detect deletions on one side and at the same time be able to create a new segment 'PieSync Trash' on the other side. </InfoBox>

<TipBox>Thanks to the feedback we have already received, we created a list of popular apps that we’re going to work on very soon. By [voting them up in our pipeline](http://www.piesync.com/connections/#vote), YOU decide which connectors we’ll release first. If you don’t see your app on the list or need any further help, drop us a line - support@piesync.com. **Don't forget to read our** [**blog**](http://blog.piesync.com/) **for the latest in productivity, apps, and technology!** </TipBox>

Infusionsoft  by Keap  offers your small business automated sales and marketing solutions  Having tools like lead generation  marketing automation  and CRM functionality all in one place  allows your business to grow and succeed     The video below g…

How to set up specific apps, what rules are available and mapping overviews

Supported Apps

<InfoBox>[**GETTING STARTED GUIDE**](/help/features/getting-started/)**: How to set up a new connection?** </InfoBox>

<InfoBox>[**ALL FEATURES EXPLAINED**](/help/features): **All our features/functionality explained in detail - no app-specifics.** </InfoBox>

**Keap,** formerly called Infusionsoft now has two products available: Infusionsoft (by Keap) and their newest solution called Keap. In this article we discuss the latter.

<TipBox>Keap is a simplified version of [Infusionsoft by Keap](/help/connector-apps/infusionsoft/), which we also support.</TipBox>

**Below you'll find detailed information, specifically for Keap integrations:**

#### Supported Keap Integrations

<Widget src="https://cdn.piesync.com/widget.js" left="infusionsoft" />

#### Authorizing Keap

To authorize Keap, you simply need you to log in and allow access. 

![](//images.ctfassets.net/f2ysq090txql/6m9QbL2XYx9yTEmATSxqS5/aba71ccc10323caf3ba536c2e9f2479f/screenshot-2019-02-01-at-13-46-25.png)

If you already authorized Keap account(s) in the past, you can _choose an existing account_. Or _add a new account_.

![](//images.ctfassets.net/f2ysq090txql/295jdx7xwtXSC2R33cNXfs/d25e5238a7266b4a89ffd8e8223c33be/screenshot-2019-02-01-at-13-48-04.png)

## Choose your contact type

Distinguish between Companies and Contacts before proceeding to the configuration page.

![](//images.ctfassets.net/f2ysq090txql/5a5GsllVms4uI6RDPtmvGV/12426108c695fe5ef3e5e4ec09e85f1d/screenshot-2019-09-18-at-14-56-01.png)

* Learn about our **contact sync below**.
* More in-depth info about our Company to Company sync can be found [here](/help/faq/can-i-sync-company-account-information/).

#### \[IF\] Supported Conditions/Filters

*   TAGS 
*   CONTACT OWNER
*   LEAD SOURCE
*   ASSIGNED/UNASSIGNED
*   FIELD VALUES (INCLUDING CUSTOM FIELDS) \[_contains/does not contain/has any value/equals/does not equal/...\]_
*   ALREADY EXISTING IN APP YOU SYNC WITH

![](//images.ctfassets.net/f2ysq090txql/nVMgRwYpFhbr1ONW76vD4/0cfa0c69aeedd1317e302e362c92c1c8/screenshot-2019-02-01-at-13-49-38.png)

#### \[THEN\] Supported Actions

*   ADD/REMOVE TAGS
*   UPDATING FIELD VALUES (INCLUDING CUSTOM FIELDS)

![](//images.ctfassets.net/f2ysq090txql/3hP8mWcgP5pqMDujzg0rME/54d53b28a1758b171f90c6d5fd1d5284/screenshot-2019-02-01-at-13-49-57.png)

####   

#### Default Field Mapping

Depending on the other app you're syncing with, you'll see a number of standard Keap fields being mapped by default. For instance, in a connection with Google Contacts, the default field mapping looks like this:  

![](//images.ctfassets.net/f2ysq090txql/7iKQSK6iJZ9yaHVHTmAWem/54d7b1d27750cd2b64040fa5c968562b/screenshot-2019-02-01-at-13-56-37.png)

<InfoBox>_PieSync syncs the default name field(s) that come with the apps. Sometimes they have a different structure in both apps you connect. E.g. first and last names are separate in app A and joint in one field in app B._ _In the background, PieSync joins first and last names together from app A to B and separates them again from app B to A. Our algorithm is smart about which part it updates in app B._ </InfoBox>

#### Customizable Field Mapping

You can and should map any additional standard & custom fields that aren't included in the default mapping yet. Bear in mind that mapping between two fields can only exist if the types of fields are compatible and the particular compatibility will determine the direction of the mapping as well. More information on Customizable Field Mapping [**HERE**](/help/features/new-customizable-field-mapping/). 

![](//images.ctfassets.net/f2ysq090txql/J2wMhmMhuPia4QBl4iS3R/9128ccb1700889849f84c5c8839e7328/screenshot-2019-02-01-at-13-57-52.png)

### Additional Options 

#### Syncing Deletions

In connections between Google Contacts and Keap, you are able to [**SYNC DELETIONS**](/help/features/syncing-deletions/) **one-way**. When a contact gets deleted in Google Contacts, we add the tag 'PieSync Trash'  to that same contact in Keap. You will be able to review this segment first before deleting or taking any other action in Keap too.  

![](//images.ctfassets.net/f2ysq090txql/3uNmZSxCTqIxsWZWIMX6um/d8d1cd981dfd4844fbfb316985b3fbc7/screen-shot-2018-04-24-at-16.27.12.png)

### Syncing Unsubscribes

In connections with Marketing Tools (e.g. such as MailChimp), you are able to [sync unsubscribes](/help/features/syncing-unsubscribes/) one-way. When a contact unsubscribes in e.g. MailChimp, we add the tag 'PieSync Unsubscribes' in Woodpecker. You will be able to review this segment first before e.g. deleting or taking action in Woodpecker.

![](//images.ctfassets.net/f2ysq090txql/6CLQLnyPzyOXy6GDsGi9bG/dc1f57adec49a42e27631edd347e85e3/screen-shot-2018-04-24-at-16.25.05.png)

### Set email addresses to Unconfirmed (only available with Infusionsoft by Keap)

Each email address stored in Infusionsoft (by Keap) is assigned a status. More in-depth information can be found [here](https://help.infusionsoft.com/userguides/contact-management/create-and-manage-contacts/email-status-icons-explained). The **unconfirmed** email status indicates that you have permission to send marketing messages to the email address.

<WarningBox>This feature is not available with Keap, but only available with Infusionsoft (by Keap).</WarningBox>

![](//images.ctfassets.net/f2ysq090txql/1sFSrJlIbkvbzcGJrh75YA/a444ef434adb54e04ed24f1ef639826e/screen-shot-2018-04-24-at-15.56.32.png)

<InfoBox>The availability of additional options in our sync is app and connection dependent. If the box (screenshot above) is not there to tick, it's simply not possible. We need to be able to detect deletions on one side and at the same time be able to create a new segment 'PieSync Trash' on the other side. </InfoBox>

<TipBox>Thanks to the feedback we have already received, we created a list of popular apps that we’re going to work on very soon. By [voting them up in our pipeline](http://www.piesync.com/connections/#vote), YOU decide which connectors we’ll release first. If you don’t see your app on the list or need any further help, drop us a line - support@piesync.com. **Don't forget to read our** [**blog**](http://blog.piesync.com/) **for the latest in productivity, apps, and technology!** </TipBox>

Keap  formerly called Infusionsoft now has two products available  Infusionsoft  by Keap  and their newest solution called Keap  In this article we discuss the latter     Below you ll find detailed information  specifically for Keap integrations    S…

Running a sync for the first time can sometimes take a while.

*   In case you have a lot of contacts in your applications, the initial sync will take a bit longer, even if you configured PieSync only to sync a subset of your contacts. 
*   During the initial scan, we need to process all of your contacts (also the contacts outside the chosen subsets) to avoid duplicates during the sync.
*   Once the sync status is active _(green)_, it should never take more than 2 to 3 minutes for any update or create to appear.

<TipBox>Notice anything unusual? Contact us at support@piesync.com</TipBox>

Running a sync for the first time can sometimes take a while      In case you have a lot of contacts in your applications  the initial sync will take a bit longer  even if you configured PieSync only to sync a subset of your contacts      During the …

Why does it take so long to see the first contacts appear?

Popular sync combinations

Clio and Infusionsoft by Keap

## 5 quick steps to do before you hit "Sync!"

![](//images.ctfassets.net/f2ysq090txql/54ScpBCj0sW99qoJjUfpuR/86ae7b3b17adbd3463fd0bf62dc4f5d4/larry.gif)

<InfoBox>Hesitant to "Start syncing now" after you configured a sync?  
Follow these steps to gain peace of mind! </InfoBox>

**1) Pause other syncs to your apps**

Turn off or pause any existing integrations in parallel (other PieSyncs, Zapier, Fullcontact, etc). Leaving these syncs on can lead to unpredictable results. Check your CRM's account settings, you may already be syncing some data (one way).

**2) Back up your data**

In the next step, we'll give you some tips on cleaning up your data. That's why it's wise to make a backup first should you be too enthusiastic in cleaning contacts. [Google Contacts, Icloud, ContactsPlus save a temporal state of your Contacts so you can always go back to a state prior to a sync](/help/want-to-learn-more/revert-a-sync/). Have contacts on your phone? [Here's a checklist.](/help/faq/get-your-phone-contacts-in-sync/)

**3) Time to clean**

Delete contacts you won't ever need anymore. You may want to empty Google's ["Other Contacts" folder](https://support.google.com/mail/answer/1069522?hl=en&visit_id=1-636459121173695326-1876924094&rd=1) filled with legacy contacts. Make sure your source & target data is rid of duplicates. Use the “find & merge duplicates” features of Google/iCloud/Outlook or from your CRM. 

*   [Instructions for Google Contacts](https://support.google.com/mail/answer/1069522?hl=en) (+ [9 extra tips provided by FullContact](https://www.fullcontact.com/blog/clean-up-google-contacts/))
*   [Instructions for iCloud](https://support.apple.com/en-us/HT203565)
*   [Instructions for Outlook.com](http://ccm.net/faq/39487-outlook-com-how-to-remove-duplicate-contacts)
*   [Instructions for CRM, for example Pipedrive](https://www.google.com/search?q=dedupe+pipedrive+contacts)

Once the sync is started, you can continue performing these clean up operations. PieSync [can detect cleaning](/help/want-to-learn-more/cleaning-up-duplicates-in-your-crm/) up contacts.

**4) Do a sanity check**

Perform a human check on whether the find&merge duplicates did its job. Merge whichever duplicates that weren’t detected automatically, delete old contacts or old addresses. By default, PieSync will only sync contacts that have an e-mail address, which is what we then use on the other side of the sync to keep your contacts unique. 

**5) Run a test sync**

If you want to test PieSync on a limited dataset, you can apply some intelligent rules to narrow down the sync. 

<Embed src="//www.youtube.com/embed/Bk_OSkK-JvQ" />

  

*   For instance, adapt rules to only sync contacts with a specific dedicated test-tag, and have it update a specific field on the other side as extra proof. If you only tag one contact in your CRM with this very specific tag, only this contact will sync. The other contacts remain untouched.![](//images.ctfassets.net/f2ysq090txql/4H8IOtuSEcAwFFWpEMv4A4/4315bb78f5091ac100c72fcc71ac5f69/blob)
*   Don't have tags in your app? Consider creating a test contact with a dummy or test e-mail address and only leave this rule enabled. Works just as well. Just know that sometimes a dummy e-mail address won't get created inside your ESP client.
    
    ![](//images.ctfassets.net/f2ysq090txql/3B3AD2S36pvyK2G2UtmyfS/b460cd55b694b72ea77f9a1f4e57f04e/blob)
    
*   Furthermore, you can always disable rules to prevent contacts from being created into an environment where you want to avoid unexpected contacts from being pushed towards! 
    
    ![](//images.ctfassets.net/f2ysq090txql/2HCSnFK21Pn9hVNi3Q1yTV/99282c381394ca36cbfc1bc7e6e1e1d1/screen-flow.gif)
    

[What are you waiting for? Start syncing! ](/help/features/getting-started/)

<TipBox>Still in doubt? Feel free to [schedule a call](https://calendly.com/piesync) with our support team.</TipBox>

5 quick steps to do before you hit  Sync        1  Pause other syncs to your apps  Turn off or pause any existing integrations in parallel  other PieSyncs  Zapier  Fullcontact  etc   Leaving these syncs on can lead to unpredictable results  Check you…

Want to learn more?

Preparing your data for PieSync

<Embed src="https://www.youtube.com/embed/mwH6sLjgIVg/" />  

By default, an iPhone will store contacts on iCloud, or, if you've opted out from iCloud, it will store them locally on your phone. How do you get these contacts synced up to other services? It all depends on where they are now! 

*   If your iPhone contacts are stored in iCloud, you can choose to [sync your contacts from iCloud directly to many of PieSync's other supported apps](http://www.piesync.com/icloud/).
*   If you're not using iCloud, you should consider moving your contacts to a cloud service, as only then will PieSync work.

**But even if your contacts are currently stored in iCloud**, and [PieSync supports iCloud](http://www.piesync.com/icloud/), you may want to make sure your iPhone uses Google Contacts instead, especially if the rest of your business runs on Google apps.

## Managing multiple contact lists on an iPhone

A quick way to find out which contacts are currently loaded up on your iPhone, is by going inside the **Contacts app**, or the **Phone app** of your iPhone.

By tapping the **Groups** icon on the top left, you'll understand that an iPhone is capable of visibly merging different databases into one single contact list.

While in some cases it is handy to have your iPhone consolidate contact lists, in most cases it actually leads to **confusion.** Because everything is neatly merged, there is no easy way to recognize in which cloud database a specific contact is being stored.![](//images.ctfassets.net/f2ysq090txql/3R930qCIp77bn5CBEqOTug/e4937fa14b75e0b5e8fda7df552698f1/image.gif)

  
<InfoBox>Where is your mom's contact stored? Is it in iCloud? Google Contacts? Your SIM card? Worse yet, is it in all three of them simultaneously? Your iPhone actually dedupes them & merges identical contacts visually!  
  
The idea is ultimately that your phone merely acts as a window into contacts databases, so we suggest you visit [contacts.google.com](http://contacts.google.com) or [icloud.com/contacts](https://www.icloud.com/contacts) respectively to see & manage these lists.</InfoBox>

## Where are your contacts stored?

So how does your iPhone manage contacts? This help article can't possibly cover all possible scenarios, but here's how you can easily find out how your iPhone is setup currently.  
  
Go to **Settings -> Contacts -> Accounts** to find out which services are allowed to manage/add contacts on your phone. In the example shown to the left, there are three accounts moving contacts into this iPhone:  

1.  iCloud
2.  Personal gmail.com
3.  G-suite-domain

It's very likely you will see something different on your phone: you may or may not have iCloud, you could have an [Outlook](http://www.piesync.com/outlook-office365/) account, and so on.

![](//images.ctfassets.net/f2ysq090txql/4dGQCrcQjhwMJIrw3KAawL/d3544012e3d0b59539ad6b96943bd33b/image.gif)

<InfoBox>**Did you know?** Connecting a Google account to an iPhone will **import** your Google Contacts. However, the contacts that you had on your phone before **are not moved to Google**. They remain stored on iCloud or on your phone! Follow these instructions to back up those contacts to Google.</InfoBox>

The next steps will help you consolidate your contacts into Google's ecosystem instead. **Wherever your contacts are,** with the [**Google Drive app**](https://itunes.apple.com/be/app/google-drive-secure-online-file-storage/id507874739), you can push your Contacts data from your iCloud or those that are locally stored  to the Google Drive and into Google Contacts.

## Move your iPhone Contacts to Google Contacts with the Google Drive app

1. [Download Google Drive](https://drive.app.goo.gl/?link=https://drive.google.com/_/backup/ios&ibi=com.google.Drive&ius=googledrive&isi=507874739) to your iPhone and sign in with your Google account. If you don’t have a Google Account, you can create one when you sign-in to Google Drive. Already have Google Drive? Make sure it’s up to date.  

![Install Google Drive Google Contacts iPhone](//images.ctfassets.net/f2ysq090txql/6q1Oh3EUTKzpAGTWVZEGEB/d5c95a281c8ee1566fda9cd877aaaaa7/image.jpeg)

2. Now it’s time to backup your content. Open Google Drive and go to the backup wizard in Menu > Settings > Backup. You can select which content you want to backup or simply backup everything. Then hit “Start”.

3. Sign-in to your Google Account on your iPhone.  

![](//images.ctfassets.net/f2ysq090txql/6jkNFu6BAaqQcxVkxn2jpi/fea21e5327c83dfab643d375e4aacbdd/image.jpeg)

4. Go to your iPhone settings and **make sure your default account is the selected** **Gmail account**.This ensures that new contacts are added to Google Contacts and can then be synced to your cloud apps such as your CRM.

<InfoBox>Don't forget to set up the "Default account" to be Google! Merely connecting a Google account isn't sufficient, you also need to make sure new contacts you create on your phone are immediately created inside Google via this setting.</InfoBox>

<Embed src="https://www.youtube.com/embed/VlMm4q1wIn0/" />


Where are your contacts stored   So how does your iPhone manage contacts  This help article can t possibly cover all possible scenarios  but here s how you can easily find out how your iPhone is setup currently       Go to Settings    Contacts    Acc…

Setting up your iPhone to sync with Google Contacts

Where possible, PieSync offers bidirectional field mappings (two-way). However, there are **some exceptions** where a mapping can only be set up one-way:  

*    When a **field cannot be modified** in the application you are syncing.

*   When a **field only allows some specific values**. In that case we do not allow writing to the field because we cannot guarantee the new value is allowed by the field. For example: dropdown, (multi)-select, status,... fields.

*   When **two mapped fields have different types** such as text, number, date,... In some of those cases we cannot guarantee a correct conversion in both sync directions. For example: the data in a number field can easily be converted to a text field, but not all text values can be synced back to the number field.

![](//images.ctfassets.net/f2ysq090txql/66hjCGL1zMNRiVjyVDJ1us/d5747886fa0d3aa4542c88c72e246cb6/image.png)
  
Bear in mind that the **general direction** of your connection affects your syncing behavior. When you have configured your connection as a one way sync in the other way (→), the following message will pop up.  

![](//images.ctfassets.net/f2ysq090txql/74uOD8xabUStQVtQHdm3MT/3c20b4f263730bd08520da5c66a942fd/image.png)

Where possible  PieSync offers bidirectional field mappings  two way   However  there are some exceptions where a mapping can only be set up one way         When a field cannot be modified in the application you are syncing      When a field only all…

Why can my fields only be mapped one-way?

<Embed src="//www.youtube.com/embed/6QGNLcgW7gA" />

## Step 1: Choosing your apps

In setting up a sync connection, you first choose [the apps](/help/faq/which-connectors-do-you-support/) that contain the contacts data you need synced. We have provided a handy search bar to quickly get to the apps you're looking for. After you select the first app, you immediately proceed to select the second app. We will connect to these apps in a second step.  

![](//images.ctfassets.net/f2ysq090txql/3KxQtwOhw5ZSMt8fYYXTfz/ee3e8abcd18d5947d5b84b9168a9ace3/screenshot-2019-05-20-at-15-18-15.png)

> We add new apps [every week!](http://www.piesync.com/connections/) 

Please reach out to us if you're not able to set up the combination you need - we might be able to help.

## Step 2: Authorize your apps

In order to use PieSync, you need to have registered accounts with the apps you selected. At this point, you'll need to connect PieSync to these apps so we can fetch the contacts data configuration. You do this for both apps. While the screenshots below are some examples, [the instructions for your app are listed separately on this page](/help/connector-apps). If it is the first time using PieSync, you will need to authorize both apps, one after the other.

![](//images.ctfassets.net/f2ysq090txql/1yIcstEdqicA8OeMVfSaUI/428747f5c872177d0df7e2eea579634b/image.jpeg)

If you have previously set up a connection with any of these apps, you can choose to re-purpose that authorization. Of course, you can also choose to login to your apps with a separate account too.

![](//images.ctfassets.net/f2ysq090txql/2reZkRSo7ZAWia7MPDV88B/04af9415b8c8fe7660a6e6c6996b651b/screenshot-2019-05-20-at-15-19-31.png)

## Step 3: Choose your contact type

Choose whether you want to sync Contacts or Leads. The availability to sync Leads depends on whether your app has a Leads entity

![](//images.ctfassets.net/f2ysq090txql/7Ak44LlJd6uTiQPVjMkPBu/2fd9180354747b46255728c013542995/screenshot-2019-05-20-at-15-30-18.png)

<InfoBox>This step will only appear if the applicable app has Leads available.</InfoBox>

## Step 4: Configure your sync

### 4.1 A two-way sync is made up by at least two rules

Once you authorized  2 apps, you tell PieSync how we should keep your contacts data in sync. By default, PieSync proposes a two-way sync with a drop-down to allow for one-way syncs ([do I need one-way or two-way?](/help/features/sync-direction/)).

![](//images.ctfassets.net/f2ysq090txql/7FOQ10iMP8cUSoUsuyH4oZ/a41f6387ed9676de2ec541d5f6074725/screenshot-2019-05-20-at-15-47-19.png)

A two-way sync starts off with 2 rules. Each rule fulfills the conditions of each side of the sync. PieSync looks at all the data stored on each side, so you can define exactly what data needs to move from one side to the other.

![](//images.ctfassets.net/f2ysq090txql/4WXwFvxUcgeOUEBZ17ujQu/d70d784e556e5bd2b797d3c583e78628/screenshot-2019-05-20-at-15-51-54.png)

> _In this  example, rule 1 dictates that for every contact that PieSync finds in Google Contacts, PieSync will update or create one in Copper in case it didn't exist already there. Rule 2 completes this 2 way sync: for each contact that exists in Copper, a counterpart will be updated or created in Google Contacts. For instance, if you don't need all of your Copper contacts into Google Contacts, simply remove this rule!_

If you need a simple all-to-all sync, this is all you need to set up (ie. don't change anything to the default setup). Starter plans are limited to two of these rules, but **the Pro plan and onward allow for more**. Why would you need more than 2 rules? Read on!

### 4.2) Adding conditions & actions

Your contacts don't behave the same way across apps:

*   In your marketing tool, customers are recipients that move across distribution lists and change subscriber status
*   in your invoicing tool, they have carefully kept address & contact information
*   In your contacts management tool linked to your phone, you expect to have their phone numbers and benefit from caller ID
*   In your e-commerce platform, new buyers become customers
*   ..And in your CRM, your customers should consolidate all of this information into a single view

Through PieSync you can and you should tweak the sync so that not only contacts get synced, but you also respect the segmentation, tags, groups, categories, custom attributes, subscription status, ... of the apps that the contacts live in. In a PieSync [rule](/help/features/multiple-rules/), you can choose to add a filter and add actions to syncs. 

![](//images.ctfassets.net/f2ysq090txql/7d7LBTtReimN4YR9MFzbVV/3c8dd3ac16c3881a11e57b45b95604bd/screenshot-2019-05-20-at-15-56-27.png)

> Good to know; in a two-way sync, PieSync will suggest to optionally undo & revert the actions so you can sync datasets in unison. In the above example, all of the contacts in Google Contacts label "Coworkers" are those that are in HubSpot's static list. If you remove contacts from the Hubspot list, they also get their Google Contacts label removed.

What you can do [depends from app to app](/help/faq/which-connectors-do-you-support/). Typically, it is in the if-clause that you'll be able to define a segment of your contacts. In the then-clause, you can perform actions such as adding the contacts to the counterpart of that same segment in the other app. Combine this with other actions you can perform as a result of a sync, and the possibilities are truly endless.

![](//images.ctfassets.net/f2ysq090txql/3pP2FN1NfJywOj07n89CWM/82bd11ed58dd49d4365684b1f3cfc726/screenshot-2019-05-20-at-16-18-46.png)

![](//images.ctfassets.net/f2ysq090txql/UR3fAVJo4MTSfRS4eojEg/dcc7b5e6a64730b63ac251bc1197ddc8/screenshot-2019-05-20-at-16-25-59.png)

> Our customers have come up with so many creative use-cases that help them maximize the benefits of their cloud-stack. 

### 4.3) Connection settings

In addition to setting up sync rules, PieSyncs presents a series of app-dependent options. These include: 

*   a toggle to help [AVOID DUPLICATES](/help/features/avoid-duplicates/) - possibly hard-coded by default
*   handy ways to have PieSync [SYNC DELETIONS](/help/features/syncing-deletions/) or [SYNC UNSUBSCRIBES](/help/features/syncing-unsubscribes/) across datasets
*   you should [CHOOSE YOUR MASTER APP ](/help/features/master-app/)so that during the initial sync and afterwards, conflicting changes can be resolved
*   in connections that include Google Contacts, we suggest you [ADDITIONALLY SYNC TO THE GOOGLE CONTACTS GROUP 'MY CONTACTS'](/help/features/my-contacts/), especially useful for iPhone users, as your iPhone contacts get synced to 'my contacts' in Google by default.

![](//images.ctfassets.net/f2ysq090txql/g07Md3qATNeSngQ4vptIj/d459cbab4f02c1268e13d4fdb9d1c3e6/image.jpeg)

> Options available under a Google-Mailchimp connection. The options under "connection settings" are app-dependent. If you do not see a particular option, the app does not support it unfortunately.

### 4.4) Field mapping

A contact is more than just a name. All your contacts attributes need to be carefully mapped with one another in a sync. 

*   PieSync's [DEFAULT FIELD MAPPING](/help/features/new-default-field-mapping/) shows you those default fields we will always keep in sync and details how we mapped them between the two apps you have connected. You cannot change these fields.
*   In the [CUSTOMIZABLE FIELD MAPPING](/help/features/new-customizable-field-mapping/), you'll be able to map fields stored in your apps that we didn't find logical counterparts for. This includes default fields as well as custom fields. The customizable field mapping is set up and shown in the white part below the default field mapping in the configuration. You can add an unlimited amount of mappings and remove, enable/disable them anytime. 

<InfoBox>Custom Mappings are available from the Pro Plan onward. More information on why you should upgrade to a Pro Plan [HERE](/help/faq/why-should-i-upgrade-to-medium-as-a-small-or-micro-subscriber/).</InfoBox>

![](//images.ctfassets.net/f2ysq090txql/6TYE1HpRDGiXLR90yDVcRy/2734fd39119f00201fa161b31d2af3f7/screenshot-2019-05-20-at-16-36-41.png)

### 4.5) Start syncing!

![](//images.ctfassets.net/f2ysq090txql/6CZH8gP8SUoaMOKgdB1lHD/bed220e9ac6040ae417e4bd3330c2631/image.png)

Make sure no other integrations are running next to PieSync for the accounts you have connected in PieSync. Other integrations will have access to your data and have the ability to manipulate as well. For this reason, we kindly ask you to use PieSync and nothing else to keep your data in sync. **Other integrations running in parallel with PieSync are a no-go!**

_In case you have a lot of contacts in your applications, the initial sync will take some time, even if you configured PieSync only to sync a subset of your contacts. During the initial scan, we need to process all of your contacts (also the contacts outside the chosen subset) to avoid duplicates during the sync. After the initial sync, it should never take much longer than five minutes for updates to show._

## Step 5: Monitor your connection in the Dashboard

Once the connection is running, the activity monitor will be your real-time view into PieSync's operations. It provides insight into: 

*   new contacts being created from your first app to your second app that didn't exist yet
*   new contacts being created from your second app to your first app that didn't exist yet (if you did a 2-way sync)
*   updates made to contacts that had been synced & matched up before: the update is now also synced up
*   whether your synchronization is active or not - you can pause the connection should you so wish

![](//images.ctfassets.net/f2ysq090txql/6sSzj03PVg91eb7tWh0LM/6e45073632cc0fcfaa72b696de1bf6c4/screenshot-2019-05-20-at-16-40-35.png)



## Optional: Want to become an expert in PieSync?
Follow Frans & Jan along [a one hour deep-dive](https://app.hubspot.com/academy/tracks/86/) on all things PieSync on the HubSpot Academy. 
[![Gif of the HubSpot Academy](//images.ctfassets.net/f2ysq090txql/5V3TGS0putUt844bcBLM6C/209bf5106150370d83c2f8d68274bade/ezgif.com-gif-maker.gif)](https://app.hubspot.com/academy/tracks/86/)

In setting up a sync connection, you first choose the apps that contain the contacts data you need synced. We have provided a handy search bar to quickly get to the apps you're looking for.

The essentials of setting up a two-way or one-way sync between your apps.

Getting started

Getting started with PieSync

microsoftdynamics

Microsoft Dynamics 365

Microsoft Dynamics 365 is a cloud-based CRM that focuses on intelligent customer engagement, and allows companies to market and sell more productively and smarter to their customers.  Native integrations to other Microsoft products make this a powerful CRM.


<InfoBox>[**GETTING STARTED GUIDE**](/help/features/getting-started/)**: How to set up a new connection?** </InfoBox>

<InfoBox>[**ALL FEATURES EXPLAINED**](/help/features): **All our features/functionality explained in detail - no app-specifics.** </InfoBox>

**Microsoft Dynamics 365** is a cloud-based CRM that focuses on intelligent customer engagement and allows companies to market and sell more productively and smarter to their customers. Native integrations to other Microsoft products make this a powerful CRM. Office 365 is Microsoft’s App suite and cloud collaboration tool and includes Microsoft Dynamics 365.

**Below you'll find detailed information, specifically for Microsoft Dynamics 365 integrations:**

## Supported MS Dynamics 365 Integrations

<Widget src="https://cdn.piesync.com/widget.js" left="msdynamics" />

This video sets up a 2-way sync between Microsoft Dynamics 365 and Chargebee.

<Embed src="//www.youtube.com/embed/0BsnntPXr9w" />

## Authorizing MS Dynamics 365

We simply ask your login details and your permission. **To Authorize your MS Dynamics 365 account, we need:**

1.  **Your Microsoft Dynamics 365 'Root Service Address', to be found in the URL of your application, it should end in** **_dynamics.com_.**
2.  **Your Microsoft Dynamics API version - you can retrieve this in the settings 'About' / The first 2 numbers represent the API version.**

![](//images.ctfassets.net/f2ysq090txql/7sI1xJX9Mz7VnkpymlI0w/617b7e80ad08b6f77e26ecaa49f71ce9/screen-shot-2018-04-24-at-12.57.02.png)

If you already authorized Microsoft Dynamics 365 account(s) in the past or in any other PieSync integration, you'll be able to the first part of the authorization and choose from your **CONNECTED ACCOUNTS**.

![](//images.ctfassets.net/f2ysq090txql/4ZPxvZI7fzN25q2GYKTuDY/21035ee991952b38aff628f905006823/2.png)

## Choose your contact type

Distinguish between Contacts, Leads or Accounts before proceeding to the configuration page.

![](//images.ctfassets.net/f2ysq090txql/J8O5ply6UCdgDOUWADNAG/94648eadbd8f0c7957a6325d242eee3f/screenshot-2019-09-19-at-11-51-37.png)

Learn about our contact sync below.

<TipBox>[Incorporate Company related information in a connection between Contacts.](/help/faq/syncing-company-related-information-on-contact-level/)</TipBox>

* More in-depth info about syncing Leads can be found [here](/help/faq/syncing-leads/).
* More in-depth info about our Company to Company sync can be found [here](/help/faq/can-i-sync-company-account-information/).

## \[IF\] Supported Conditions/Filters

*   OWNERSHIP
*   EMAIL OPT-IN/OPT-OUT STATUS
*   ACTIVE/INACTIVE STATUS
*   ALREADY EXISTING IN APP YOU SYNC WITH 
*   STATUS
*   CONTACT FIELDS (phone, address, ....)
*   CUSTOM FIELDS

![](//images.ctfassets.net/f2ysq090txql/3KvMf6itAsiSbG3TuaB7QQ/aee8e894df037ed7b8d1ab935bfd4d54/image.png)

## \[THEN\] Supported Actions

*   UPDATE (CUSTOM) FIELD VALUES 

![](//images.ctfassets.net/f2ysq090txql/7gbikvMZYKqbLXkp0oXdoV/a5bc9237df5200d84fa167fd41d85f85/image.png)

## Default Field Mapping

Depending on the other app you're syncing with, you'll see a number of standard Microsoft Dynamics 365 fields being mapped by default. For instance, in a connection with Google Contacts, the default field mapping looks like this:

![](//images.ctfassets.net/f2ysq090txql/QlV3gitBnFStAq6uU7sLs/5b1836dc3888b75c1e6d827850db310b/image.png)

<InfoBox>PieSync syncs the default name field(s) that come with the apps. Sometimes they have a different structure in both apps you connect. E.g. first and last names are separate in app A and joint in a single field in app B. In the background, PieSync joins first and last names together from app A to B and separates them again from app B to A. Our algorithm is smart about which part it updates in app B</InfoBox>

## Customizable Field Mapping

You can custom map your Microsoft Dynamics 365 Custom Fields and any additional standard fields that aren't included in the default mapping yet. Bear in mind a mapping between two fields can only exist if the types of fields are compatible and the particular compatibility will determine the direction of the mapping as well. More information on Customizable Field Mapping [**HERE**](/help/features/new-customizable-field-mapping/). 

![](//images.ctfassets.net/f2ysq090txql/1C36efxvVHD4Jj6hivmy9J/60d775b9fdc632a0e2c59c33dc6a31de/image.png)

## Additional Options

### Syncing Unsubscribes/Deletions

Currently, there are no MS Dynamics 365 integrations on the PieSync platform that support our [Unsubscribes](/help/features/syncing-unsubscribes/)/[Deletions](/help/features/syncing-deletions/) sync.

<InfoBox>The availability to Sync Unsubscribes/Deletions is app and connection dependent. If the box (screenshots above) is not there to tick, it's simply not possible. We need to be able to detect unsubscribes/deletions on one side and at the same time be able to create add the tag 'PieSync Unsubscribes' or ‘PieSync Trash’ on the other side. More Information on Syncing Unsubscribes [here](/help/features/syncing-unsubscribes/) or on Deletions [here](/help/features/syncing-deletions/).</InfoBox>

<TipBox>Thanks to the feedback we have already received, we created a list of popular apps that we’re going to work on very soon. By [voting them up in our pipeline](http://www.piesync.com/connections/#vote), YOU decide which connectors we’ll release first. If you don’t see your app on the list or need any further help, drop us a line - support@piesync.com.  **Don't forget to read our** [**blog**](http://blog.piesync.com/) **for the latest in productivity, apps, and technology!**</TipBox>

Microsoft Dynamics 365 is a cloud based CRM that focuses on intelligent customer engagement and allows companies to market and sell more productively and smarter to their customers  Native integrations to other Microsoft products make this a powerful…

MS Dynamics 365

<Embed src=" https://www.youtube.com/watch?v=04xRku0dQcs"/>

The field mappings allow you to decide which contact data should be synced for each contact. Every connection comes equipped with a predefined list of mapped contact fields, which we call the "[Default Field Mapping](/help/features/new-default-field-mapping/)". This a list of the default contact fields that PieSync was already able to map. 

As of the Pro Plan, you are able to customize the default field mappings and you are also able to add your own field mappings. This is what we will discuss in this article. Any user-created mapping is also often referred to as the "**Custom (Field) Mapping"**.  

_Below you see an example of the field mapping between Pipedrive and ActiveCampaign. Of course, this is list of default mapped fields is dependant on the apps you have connected and which (custom) fields you have available on both sides._

![](//images.ctfassets.net/f2ysq090txql/46XBGtEPZpRT2zCS9hrBjM/5fa119e33488e4d9bc769aac35a00717/screenshot-2019-05-15-at-21-20-17.png)

<TipBox>If you've just added a field in your app and it hasn't popped-up yet in the dropdown, then just press 'refresh field list' in the bottom right corner</TipBox>

### Changing the Default Field Mapping

As the default field mapping is a predefined list of mappings, some of the field mappings might not suit your use case. In that case, you are able to change that field mapping by:

1.  Disabling the mapping by setting the toggle to 'off'
2.  Adding a field mapping and choose the two fields you want to connect.

_In the example below we wanted to remap the default mapping for Phone <> Work Phone to Phone <> Home Phone and Mailing Address <> Work Address to Mailing Address <> Home Address:_

![](//images.ctfassets.net/f2ysq090txql/2qEbpfOnUAlYQnHoVw2qqn/49bff488ae2d340fe61e992de9f92711/screenshot-2019-07-12-at-15-33-15.png)

### Adding Custom Mappings

To add your own field mapping, simply click 'Add field mapping' below the Default Field Mapping. 

By default the custom mappings will sync in the direction you have set up in the configuration of your connection, so this could be either two-way or one-way. However, you are often able to change the sync direction of your custom field mappings.  

![](//images.ctfassets.net/f2ysq090txql/5mEsmPqVaLrsussQY8ZPNv/1be51718034ccba7380ddcd3eef52607/screenshot-2019-05-15-at-21-24-51.png)

There are some **exceptions** where a custom field mapping can only sync one-way:

*   When a field is read-only: Certain contact fields are not allowed to be modified through a third-party integration such as PieSync
*   When a field only allows some specific values: eg. a custom date field.
*   When two mapped fields are of a different type: eg. a dropdown field

_Below is an example of a field that can't be modified through a third-party and therefore only syncs one-way (→). More in-depth information can be found here._

![](//images.ctfassets.net/f2ysq090txql/68osNZIbM4ePJx5UnKTxQu/e27bdf65857a0d92f550f87c6b43db51/screenshot-2019-05-15-at-21-26-50.png)

<InfoBox>Bear in mind that the general direction of the sync decides your syncing behaviour. When you have your connection configured as a one way sync [in the other way](/help/features/sync-direction/) (←), following message will pop up.  
</InfoBox>

![](//images.ctfassets.net/f2ysq090txql/73FxAlQnEXXzBRiGlDljvT/dd5fcc13c0b1cbc767924f5e602557a9/screen-shot-2018-01-29-at-15-30-09.png)

### Why are my (custom) fields unavailable/greyed out?

1.  Each field can only be mapped once. All fields might are already mapped. 
2.  Fields in a custom mapping must be of a **similar type**. For example, you can’t sync a numeric field to a date field. When selecting fields in a custom mapping, the list on the other side will only show the fields that can be mapped, unavailable mappings are either not visible or greyed out. 
3.  Some custom fields are **technically not mappable,** such as lists or fields with multiple values (see example below). With multiple values, we mean fields such as emails, phone numbers and addresses where each value has a label to differentiate between ‘home’, ‘work’ and ‘other’ for example. In most cases, these fields are already included in the default field mapping. 

![](//images.ctfassets.net/f2ysq090txql/5wyWHyfB01C9gpDjK7Rtwo/ac93bbeb96250ac44703b162c4bab6f6/image.png)

<InfoBox>Note that PieSync will only sync the data that is readily available to the customer data type. In a contact sync we may not sync fields related to leads or the related company. </InfoBox>

<TipBox>**Don’t forget to read our [Blog Post](http://blog.piesync.com/custom-fields/) about our Customizable Field Mapping feature!** </TipBox>

Changing the Default Field Mapping  As the default field mapping is a predefined list of mappings  some of the field mappings might not suit your use case  In that case  you are able to change that field mapping by   1   Disabling the mapping by sett…

Customizable Field Mapping

kw logo

KWCommand

KW Command allows you to optimize, manage, and run your real estate business with unprecedented simplicity and insight, inside Keller Cloud. It is the centralized environment for everything a Keller Williams agent and their team must accomplish during any given day.

<InfoBox>[**GETTING STARTED GUIDE**](/help/features/getting-started/)**: How to set up a new connection?**</InfoBox>

<InfoBox>[**ALL FEATURES EXPLAINED**](/help/features): **All our features/functionality explained in detail - no app-specifics.**</InfoBox>

**KWCommand** allows you to optimize, manage, and run your real estate business with unprecedented simplicity and insight, inside Keller Cloud. It is the centralized environment for everything a Keller Willliams agent and their team must accomplish during any given day.

## Keller Williams use cases

Sync KWCommand with other **CRM's**

<Embed src="https://www.youtube.com/embed/dSA7Jz5aVKs?feature=oembed" />

Sync KWCommand with **marketing platforms**

<Embed src="https://www.youtube.com/embed/3Hwrva3taCw?feature=oembed" />

Sync KWCommand with **your phone**

<Embed src="https://www.youtube.com/embed/X4_qmmT79sM?feature=oembed" />

**Below you'll find detailed information, specifically for KWCommand integrations:**

## Supported KWCommand Integrations

<Widget src="https://cdn.piesync.com/widget.js" left="kwcommand" />

## Authorizing KW Command

To authorize KW Command, just go to KW Command settings & choose for PieSync. A PieSync account connected to your KW Command account will open automatically. Only if you are authorizing KW Command out of an existing PieSync account, we require your username and password.

![](//images.ctfassets.net/f2ysq090txql/2aUTokSLUGwysSLwxwrf8O/fc5c32da3c24a502b8a054f77cecf788/screen-shot-2019-02-11-at-10-17-10.png)

If you already authorized KWCommand account(s) in the past or in any other PieSync integration, you'll be able to skip the first part of the authorization and choose from your **CONNECTED ACCOUNTS**.

![](//images.ctfassets.net/f2ysq090txql/7n0PkfTKfKGUq7AeAIPVrh/4c5bd9425e566a71e4eb977a19af3c7c/screen-shot-2019-02-11-at-10-19-42.png)

## \[IF\] Supported Conditions/Filters

*   has Tag
*   Notes
*   Preferred Method of Contact
*   Stage
*   ...
*   Field values (_INCLUDING CUSTOM FIELDS_)
*   Already existing in the app you sync with

![](//images.ctfassets.net/f2ysq090txql/5Xw4mG1mrMq91obthDSEra/73f7a96ad507f259c0afd68932f7b2ac/screen-shot-2019-02-11-at-10-20-07.png)

## \[THEN\] Supported Actions

*   Add Tag / Remove Tag
*   Update Notes
*   Update Preferred Method of Contact
*   ...
*   Updating field values (_INCLUDING CUSTOM FIELDS_)

![](//images.ctfassets.net/f2ysq090txql/7oy0WLtPyaaQTPP2RcLlog/98e0cc15c6a009fa39996f56954b8e3c/screen-shot-2019-02-11-at-10-20-25.png)

## Default Field Mapping

Depending on the other app you're syncing with, you'll see a number of standard KWCommand fields being mapped by default. For instance, in a connection with Google Contacts, the default field mapping looks like this:

![](//images.ctfassets.net/f2ysq090txql/l3CYEINv8c0bMQ7JaJKRW/018b429a1731bf80828044a9261e1adf/image.png)

<InfoBox>PieSync syncs the default name field(s) that come with the apps. Sometimes they have a different structure in both apps you connect. E.g. first and last names are separate in app A and joint in a single field in app B. In the background, PieSync joins first and last names together from app A to B and separates them again from app B to A. Our algorithm is smart about which part it updates in app B.</InfoBox>

<WarningBox>Please note if the address mapping of a contact does not have the fields "street", "number" and "city" filled out, the address will not sync.</WarningBox>

## Customizable Field Mapping

You can custom map your KWCommand Custom Fields and any additional standard fields that aren't included in the default mapping yet. Bear in mind a mapping between two fields can only exist if the types of fields are compatible, and the particular compatibility will determine the direction of the mapping as well. More information on Customizable Field Mapping [here](/help/features/new-customizable-field-mapping/).

![](//images.ctfassets.net/f2ysq090txql/7m6blJNXOK4QGM2mCMIbAI/149807aedf44d25ecefb9f205ebb094a/screen-shot-2019-02-11-at-10-26-49.png)

## Additional Options

### Syncing Deletions

Currently, there are no KWCommand integrations on the PieSync platform that support our [deletions sync](/help/features/syncing-deletions/).

### Syncing Unsubscribes

Currently, there are no KWCommand integrations on the PieSync platform that support our [unsubscribes sync](/help/features/syncing-unsubscribes/).

<InfoBox>The availability to Sync Unsubscribes/Deletions is app and connection dependent. If the box is not there to tick, it's simply not possible. We need to be able to detect unsubscribes/deletions on one side and at the same time be able to create add the tag 'PieSync Unsubscribes' or ‘PieSync Trash’ on the other side. More Information on Syncing Unsubscribes [here](/help/features/syncing-unsubscribes/) or on Deletions [here](/help/features/syncing-deletions/).</InfoBox>

## Start Syncing

![](//images.ctfassets.net/f2ysq090txql/3nQhYJUmRlclrJ569OtsZG/b33520f099584b1dc75e38e3508981a2/screen-shot-2019-02-11-at-10-36-29.png)

Hit the "start syncing now" button once you have finalized your configuration. PieSync will first scan all your contacts in both applications, even if you only choose to sync a subset. This initial scan is necessary to [avoid duplicates](/help/features/avoid-duplicates/). After this scan, the synchronization will start! If you have a lot of contacts, this can take a bit longer. 

Have a look at the [PieSync dashboard](/help/features/pie-sync-dashboard-logging/) for an overview of your syncing activity. 

<WarningBox>Is your connection active but not showing activity feed, have a look at your [troubleshooting](/help/faq/troubleshooting/) to make sure everything is correctly set up.</WarningBox>

<TipBox>Thanks to the feedback we have already received, we created a list of popular apps that we’re going to work on very soon. By  [voting them up in our pipeline](http://www.piesync.com/connections/#vote), YOU decide which connectors we’ll release first. If you don’t see your app on the list or need any further help, drop us a line - [support@piesync.com](mailto:support@piesync.com).  **Don't forget to read our** [**blog**](http://blog.piesync.com/) **for the latest in productivity, apps, and technology!**</TipBox>

KWCommand allows you to optimize  manage  and run your real estate business with unprecedented simplicity and insight  inside Keller Cloud  It is the centralized environment for everything a Keller Willliams agent and their team must accomplish durin…

Copper-icon-circle-pink

Copper

pipedrive

Pipedrive

1CRM-logo-box

1CRM

logo-3dcart

3dcart

act!

Act! 365

actpremium

Act! Premium

activecampaign

ActiveCampaign

activedemand

ActiveDEMAND

activetrail-1502192111-logo

ActiveTrail

Acumatica

Acumatica CRM

agendor_logo

Agendor

agilecrm

Agile CRM

aircall-icon@2x (1)

Aircall

allclients

AllClients

amocrm_logo

amoCRM

apollo.io logo 

Apollo

apptivo

Apptivo

aproplan

Aproplan

apto_logo

Apto

Aritic-Logo

Aritic PinPoint

Aritic Sales CRM

AT & T

AT&T Office@Hand

autoklose logo png 

Autoklose

autopilot

Autopilot

aweber

AWeber

benchmark

Benchmark

bexio

bigcommerce

BigCommerce

bigcontacts

BigContacts

bitrix

Bitrix24 CRM

bombbomb

BombBomb

bookeo

Bookeo

boomtown

BoomTown

Brivity CRM

btcloudphone

BT Cloud Phone

bullhorn

Bullhorn

campaignmonitor

Campaign Monitor

campaigner

Campaigner

capsulecrm

Capsule

chargebee

Chargebee

cin7_logo_piesync

Cin7

cxsocial

Clarabridge Engage

Classy-icon-coral

Classy

click-send_logo_piesync

ClickSend

clio

Clio Manage

closeio

Close

companyHub

CompanyHub

connectwisemanage

ConnectWise Manage

constantcontact

Constant Contact

Contactlab Marketing Cloud

Contacts+ Logo Mark (1)

Contacts+

contactually

Contactually

convergehub

ConvergeHub

bpmonline

Creatio

Crisp

currentrms

Current RMS

datavalidation

DataValidation

daylite

Daylite

d-logo-L-transparent

Debitoor

Delivra

desk

Desk

logo-digitaleo

Digitaleo

directmailmac

Direct Mail for Mac

DD-roundel-512x512

dotdigital Engagement Cloud

dotloop

Dotloop

drift_logo

Drift

drip

Drip

dubb-logo-full

Dubb

easybill

EasyBill

efficycrm

Efficy CRM

Elastic Email

emma

Emma

ERPNext logo

ERPNext

espocrm

EspoCRM

eventbrite 2018

Eventbrite

eztexting

EZ Texting

facebook-lead-ads

Facebook Lead Ads

facten

Facten

fastbill

FastBill

Start syncing your Keap contacts
two-way with more than 220 other apps

Discover how PieSync can make your cloud apps work together

Accurate & real-time data

Save time

Easy & Secure

Free Trial

Start syncing Keap with one of our 229 apps

Related Keap resources

9 of the best CRMs for digital agencies

Help Articles related to syncing Keap

How long does it take to sync contacts or updates?

Infusionsoft by Keap

Keap

Why does it take so long to see the first contacts appear?

Clio and Infusionsoft by Keap

Preparing your data for PieSync

Setting up your iPhone to sync with Google Contacts

Why can my fields only be mapped one-way?

Getting started with PieSync

MS Dynamics 365

Customizable Field Mapping

KWCommand

Start syncing your Keap contacts two-way with more than 220 other apps

Discover how PieSync can make your cloud apps work together

Accurate & real-time data

Save time

Easy & Secure

Free Trial

Start syncing Keap with one of our 229 apps

Related Keap resources

9 of the best CRMs for digital agencies

Help Articles related to syncing Keap

How long does it take to sync contacts or updates?

Infusionsoft by Keap

Keap

Why does it take so long to see the first contacts appear?

Clio and Infusionsoft by Keap

Preparing your data for PieSync

Setting up your iPhone to sync with Google Contacts

Why can my fields only be mapped one-way?

Getting started with PieSync

MS Dynamics 365

Customizable Field Mapping

KWCommand

Start syncing your Keap contacts
two-way with more than 220 other apps